Print Page | Close Window

MS8 Chassis (Toshiba PD0613-1)

Printed From: ukVac.com
Category: Trading Post
Forum Name: For Sale
Forum Description: Sell your stuff
URL: http://www.ukvac.com/forum/forum_posts.asp?TID=359161
Printed Date: 18 Aug 2017 at 5:21pm


Topic: MS8 Chassis (Toshiba PD0613-1)
Posted By: Vamino
Subject: MS8 Chassis (Toshiba PD0613-1)
Date Posted: 01 Aug 2017 at 11:53am
Google tells me this chassis is from a MS8.

No remote board.

I'm not sure if it works or not.
Spares or repair.

15 quid posted.

Thanks.












-------------
Insert Coin[s]



Replies:
Posted By: SUPERSPRINT
Date Posted: 01 Aug 2017 at 1:07pm
Do you know if this normally used in sega drivers? Outrun 2, scud race etc?


Posted By: Vamino
Date Posted: 01 Aug 2017 at 4:28pm
Originally posted by SUPERSPRINT SUPERSPRINT wrote:

Do you know if this normally used in sega drivers? Outrun 2, scud race etc?


As far as I'm aware MS8 monitors are used in older drivers such as Daytona USA Sega Rally etc, and may also used in older Sega cabs such as Astro City's.

Later cabs like Scud Race usually have MS9 monitors fitted, and the later 31khz cabs like Outrun2/F355/Naomi use Sanwa 29e31s or Nanao 2932 monitors. 

I don't have any MS8 monitors so I have no use for it nor can I test it.

Thanks.


-------------
Insert Coin[s]


Posted By: Vamino
Date Posted: 05 Aug 2017 at 2:48pm
Price reduction. Smile


-------------
Insert Coin[s]


Posted By: Mykill
Date Posted: 10 Aug 2017 at 3:57pm
Pm sent

-------------
Don't touch the red wire


Posted By: Vamino
Date Posted: 10 Aug 2017 at 8:58pm
I've not had a PM from you mate?


-------------
Insert Coin[s]


Posted By: Mykill
Date Posted: 12 Aug 2017 at 10:43pm
Tried again

-------------
Don't touch the red wire


Posted By: Vamino
Date Posted: 12 Aug 2017 at 11:14pm
Just sent you a PM.

Obviously it's gonna cost a bit more to ship NZ mate.
But I'll do the chassis for £10 and whatever the shipping to NZ is.
If it's not too expensive to ship that is! I've never shipped something this big to NZ before.
 
Thanks.


-------------
Insert Coin[s]


Posted By: gunblade
Date Posted: 12 Aug 2017 at 11:33pm
its not a nanao ms8, its a Toshiba chassis and it looks to be a tri sync


Posted By: gunblade
Date Posted: 12 Aug 2017 at 11:34pm
actually make that 15/25 as I can see the frequency header



Print Page | Close Window