Print Page | Close Window

Various Cabs and pcbs for sale

Printed From: ukVac.com
Category: Trading Post
Forum Name: For Sale
Forum Description: Sell your stuff
URL: http://www.ukvac.com/forum/forum_posts.asp?TID=359942
Printed Date: 17 Oct 2017 at 9:02am


Topic: Various Cabs and pcbs for sale
Posted By: SUPERSPRINT
Subject: Various Cabs and pcbs for sale
Date Posted: 17 Sep 2017 at 12:18am
List will be updated with photos

Cabs are:

Sega thunderblade deluxe. This cab came from France recently and is complete. It's in need of full restoration, and currently when switched on, the mains transformer hums away but shows no other signs of life. The monitor has a little 'game over' burn but it's faint and typical for this game. Some of the plastics are cracked and the metalwork will need sanding/blasting/painting. It's a project no doubt. The stick movement works well, moving the seat easily from left to right, I'm sure this is not powered. It's a large game so takes up the space of a normal cockpit driver.
Asking £250 SOLD

Dedicated Star Wars Pod racer twin, in good condition. One side monitor needs rebuilding with at least a new LOPT, and the left side monitor works but will need at least a cap kit as it's taking a minute to warm up. The pcb situation is that the left side comes up on screen saying that both sides are set as player one. Not sure what this is I have run out of time and space to keep it. I also have a spare full pcb set (spares only) and a supposed working Hikaru main board. I havet properly tested the pcbs inside the cab. With the spares and monitor rebuilds you should have a working twin with some work.
Asking £500



Dedicated namco Tekken 3. Has the topper also. I haven't tested this at all so sold as not working. If I can find time to check it then I'll update. Needs a new castor on the bottom and maybe a new cpo. I'll also throw in a tekken 1 pcb not working. It's does also need a new smoke glass.
Asking £250 ON HOLD



Dedicated konami lethal enforcers 2. Genuinely untested, I'll will try to test soon, assume not working. Cab is in excellent condition, all artwork is intact and looks great. Has the original konami blue and pink enforcer guns.
These don't come up very often, and this is an lovely example.
Asking £300

Dedicated Midway/Nintendo crusin usa upright currently not working, needs a monitor rebuild and may have a pcb issue, although it does boot into the test sequence I know this because these pcbs have a distinctive sound when booting. Removed temporarily for a monitor rebuild.

Empty small bas cab
Asking £50, with a monitor (that needs rebuilding) £100.

Midi BAS jamma cab
Asking £175 cab is working but the monitor will need rebuilding as the picture is too blurry to use.
SOLD

Brent Leisure Players Choice (Nintendo playchoice single monitor)This cab needs work to the I/O board which runs the credits and display. Game seems to run blind, although the monitor has been rebuilt with caps and a new flyback so that's working. Will come with a working pcb and 6 games to get you started. Super Mario 1 and 2, mike Tyson, tennis and 2 others which ill update sunday."
Withdrawn from sale

Pcbs

Original Blood bros, fully working.
Asking £50 posted. SOLD

Original capcom 1942. Not working. Blue streaks on screen. Has a soldered on Jamma adaptor. I have made no attempt to repair this. Some ttls or rams have rusty legs.
Asking £35 posted. SOLD

Bootleg street fighter 2 champion edition (some crazy turbo edition) boots to the title screen then goes black. I have had it in test by moving dips.
Asking £25 posted.

Kaneco super nova system with puzz loop bare cart. System shows euro version although this may just be the cart. Fully working in original cardboard box.
Asking £55 posted.

Bootleg arkanoid untested needs an adaptor has had one soldered on at some point or the pins repaired.
Asking £15 posted.

Original data east tumblepop not working.
Asking £35 posted. SOLD

Original art and magic ultimate tennis. Jamma pcb fully working.
Asking £30 posted.

Original namco Pac land. Has an adaptor fitted for electrocoin pinout, I haven't tested as I don't have an adaptor.
Assume needs work.
Asking £45 posted. SOLD

Original Taito Jigoku Meguri (Bonze adventure) Jamma pcb tries to boot but gets stuck on a blank screen, could be a simple fix. So needs work.
Asking £35 posted.

Technos Wwf superstars tested not working, doesn't boot. £25 posted SOLD

Bootleg Phoenix by CGI. Has a nice Jamma adaptor, working with missing music, may just need a new eprom or reseating, hence £30 posted. SOLD
























            

























Replies:
Posted By: Brettster
Date Posted: 17 Sep 2017 at 7:58am
can you post a pic of the small bas cab?
I'm thinking of making a Bubble Bobble dedicated cab




-------------
Looking for More Space!!


Posted By: SUPERSPRINT
Date Posted: 17 Sep 2017 at 8:57am
more pics added


Posted By: Brettster
Date Posted: 17 Sep 2017 at 9:43am
Cheers, looks alot like a Europa cab I had previously. looking for something more curvy

Thanks anyway :)


-------------
Looking for More Space!!


Posted By: Retroman839
Date Posted: 17 Sep 2017 at 4:07pm
Where are you located bud?


Posted By: Retroman839
Date Posted: 17 Sep 2017 at 4:10pm
I'm up for the play choice I'm in south uk
I'm hoping your not to far so we can have a deal
So please put me down for the play choice


Posted By: neil1637
Date Posted: 17 Sep 2017 at 4:11pm
Originally posted by Retroman839 Retroman839 wrote:

Where are you located bud?


It shows Devon under his name.



-------------
Please visit my Arcade Diary Blog at https://neilsarcadediary.wordpress.com/" rel="nofollow - https://neilsarcadediary.wordpress.com/

Always looking for Cabaret Cabinets


Posted By: Ihunt4
Date Posted: 17 Sep 2017 at 4:26pm
Empty small bas cab
Any chance you can drop it off in Derby?
If yes I'll take it.


Posted By: SUPERSPRINT
Date Posted: 17 Sep 2017 at 5:48pm
I'm in north Devon. I can arrange delivery to derby, for about £40.


Posted By: Retroman839
Date Posted: 17 Sep 2017 at 5:49pm
Hi can you arrange delivery to high Wycombe ?
For players choice? Cheers Danny


Posted By: SUPERSPRINT
Date Posted: 17 Sep 2017 at 5:51pm
Pm'ed you Danny


Posted By: Ihunt4
Date Posted: 17 Sep 2017 at 6:34pm
Empty small bas cab
Asking £50,
That's the twin stick?


Posted By: Ihunt4
Date Posted: 17 Sep 2017 at 6:38pm
Originally posted by SUPERSPRINT SUPERSPRINT wrote:

I'm in north Devon. I can arrange delivery to derby, for about £40.


If it's the twin stick I'll take it.


Posted By: SUPERSPRINT
Date Posted: 17 Sep 2017 at 6:52pm
No it's the single stick that's empty.


Posted By: Ihunt4
Date Posted: 17 Sep 2017 at 7:06pm
Originally posted by SUPERSPRINT SUPERSPRINT wrote:

No it's the single stick that's empty.

Could you do the twin stick for £175 delivered?


Posted By: Joker CK
Date Posted: 17 Sep 2017 at 7:18pm
I'm interested in the wwf Wrestlefest. Out of interest when you say it doesn't boot, is there any signs of life? Flashing screen, keeps resetting etc?


Posted By: Joker CK
Date Posted: 17 Sep 2017 at 7:26pm
Just noticed the pictures and I don't believe that is WWF Wrestlefest but WWF Superstars. Wrestlefest was a single pcb, superstars was a two board stack.


Posted By: SUPERSPRINT
Date Posted: 17 Sep 2017 at 8:04pm
Apologies it is a superstars. Ill update the original post. It just displays garbage on screen. I have made no attempt to fault find.


Posted By: Joker CK
Date Posted: 17 Sep 2017 at 8:12pm
Originally posted by SUPERSPRINT SUPERSPRINT wrote:

Apologies it is a superstars. Ill update the original post. It just displays garbage on screen. I have made no attempt to fault find.


Ok thanks. I'm actually only after a Wrestlefest so thanks anyway. Good luck with the sale.


Posted By: Paul_in_nottingham
Date Posted: 17 Sep 2017 at 8:21pm
How much for the upright Thunderblade?


Posted By: SUPERSPRINT
Date Posted: 17 Sep 2017 at 8:22pm
The thunderblade is on hold I'm afraid.


Posted By: SUPERSPRINT
Date Posted: 04 Oct 2017 at 8:27pm
Some cabs and pcbs added.


Posted By: Blinky
Date Posted: 04 Oct 2017 at 8:41pm
Hiya. I might be interested in the Pac Land PCB. Can you send me some pictures? Thanks.


Posted By: SUPERSPRINT
Date Posted: 04 Oct 2017 at 8:44pm
Pics uploading in a min.


Posted By: Blinky
Date Posted: 04 Oct 2017 at 8:46pm


Posted By: Big Phil
Date Posted: 04 Oct 2017 at 9:35pm
Please reserve the Star Wars pod racer twin for me. Could you post pics?

-------------
DMD Board Repairer


Posted By: K1ngarth3r
Date Posted: 04 Oct 2017 at 10:01pm
Looking forward to seeing pictures of Lethal Enforcers 2!

-------------
Looking for: American Laser Games stuff!, Dragon's Lair 2 dedicated cab


Posted By: SUPERSPRINT
Date Posted: 04 Oct 2017 at 11:01pm
Tekken and LE2 pics are a bit rubbish ill take some over the weekend.


Posted By: andrewsm
Date Posted: 05 Oct 2017 at 12:46am
Be up for the Pheonix pcb if still free

-------------
WANTED: Any Nichibutsu stuff, Pre Jamma Fan. scrap nichibutsu table
http://www.arcadetester.co.uk" rel="nofollow - http://www.arcadetester.co.uk


Posted By: Blip
Date Posted: 05 Oct 2017 at 5:50am
I will take the Pac-Land if it’s still available.

-------------
Wanted: Original Ghosts & Goblins\Dragon Buster\Mario Bros.


Posted By: SUPERSPRINT
Date Posted: 10 Oct 2017 at 10:15pm
Updated and added thunderblade deluxe.


Posted By: Jodo
Date Posted: 11 Oct 2017 at 12:01am
PM sent Thunderblade Dlx

-------------
Space Harrier Arcade World Record Holder!!
Twin Galaxies Official Score: 42,384,290
Have a question about the forum? Need some help? Why not drop me a PM...


Posted By: SUPERSPRINT
Date Posted: 12 Oct 2017 at 7:55pm
Photos added for tekken 3 and le2. Monitors will be repaired this weekend. So should be able to show some working photos soon.


Posted By: SUPERSPRINT
Date Posted: 14 Oct 2017 at 11:20pm
Some pcbs added and some price drops.


Posted By: penrhos
Date Posted: 15 Oct 2017 at 12:48am
Any give on price for the Kaneko PCB? Only want it for a spare.


Posted By: GadgetFreak
Date Posted: 15 Oct 2017 at 11:11am
I will take the 1942 & Blood Bros please, pm sent!



Print Page | Close Window