Print Page | Close Window

Hantarex MTC9000 cap kits + interest check

Printed From: ukVac.com
Category: Trading Post
Forum Name: For Sale
Forum Description: Sell your stuff
URL: http://www.ukvac.com/forum/forum_posts.asp?TID=371445
Printed Date: 17 Jul 2019 at 8:03am


Topic: Hantarex MTC9000 cap kits + interest check
Posted By: Ace`
Subject: Hantarex MTC9000 cap kits + interest check
Date Posted: 09 Jul 2019 at 4:40pm
I've put together a few cap kits for sale but don't have many as this is mainly an interest check to see if there is demand for more and to keep doing them and also which version is most popular if any. If there's enough demand for these I'll also make kits for other monitors (K7000, G07, Polo etc).

I've put these kits together in a way that they are compatible with all revisions of the MTC9000, you'll end up with one left over electrolytic cap because of this. It's also compatible with the Kortex clone and the 25" MTC9010 but missing the three caps for the east / west pcb, I can offer a supplement kit to add these three.

All the electrolytic caps are Japanese (Nichicon mostly) high hour, long life, low esr, 105c for the best quality possible.

I've made two options, a standard kit which is every electrolyic cap minus the filter cap and a deluxe kit which has every electrolyic along with the filter cap and also 9 film cap replacements for the HV section (as these are known to fail now too). Depending on the chassis revision not all 9 will be needed but it's again to cover all revisions.


Standard Cap Kit (24 capacitors) - £12.95 + postage
Deluxe Cap Kit (35 capacitors)- £18.95 + postage

I need to double check postage costs, the deluxe kit won't fit through large letter because of the filter cap but the standard kits should.

Here's a picture of a 'prototype' deluxe kit. Smile As you can see I'll include a cap map / list.






-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame



Replies:
Posted By: TWB
Date Posted: 09 Jul 2019 at 5:52pm
Could I get get two deluxe kits if available, please.

I would also be interested in Polo and Kortec kits if you decide to do them.


-------------
WANTED
Cabs:
Leisure 2000
PCBs: Iron Horse
Parts:


Posted By: SUPERSPRINT
Date Posted: 09 Jul 2019 at 5:54pm
I think you’ll do well from these. About time someone did it.


Posted By: bonehead
Date Posted: 09 Jul 2019 at 7:15pm
What would g07 kits plus the b+ filter cap cost?
I might need 3 kits.

Thanks
Steve

-------------
Always looking for a bargain.
Wanted., bezerk, mad planets.


Posted By: Ace`
Date Posted: 09 Jul 2019 at 7:16pm
Just one deluxe kit left now and a few standard kits. Polo I'll do next I think, Kortec (or Kortex?) Smile might be a bit more tricky as there are quite a few different ones.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: funhouse
Date Posted: 09 Jul 2019 at 7:39pm
I'd be interested in just the 9 film caps if you would be able to sell them separately?

As mentioned above - there must be good demand for many PCBs if you can source quality correct replacements for PCBs. 

You should summon a vote to find the most popular PCBs. Does this forum allow 'Vote' posts?

My MTC9000 is powered by a currently flaky US250 PSU which I'd definitely be interested in a cap kit for.


Posted By: pedro6994
Date Posted: 09 Jul 2019 at 11:29pm
Excellent!


Posted By: philmurr
Date Posted: 10 Jul 2019 at 7:05am
Excellent work Paul


Posted By: Ace`
Date Posted: 10 Jul 2019 at 9:55am
Thanks guys, looks like I underestimated how popular the deluxe kits would be. I better order some more filter caps. Thumbs Up



-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: Kev A
Date Posted: 10 Jul 2019 at 10:01am
Depending on which Polo versions you do, I would definitely be interested, polo 2 15/25 and polo 1 25khz would be good


Posted By: kidyamlo
Date Posted: 10 Jul 2019 at 10:05am
No immediate requirement but I would still probably take a few deluxe kits, just to keep in hand.


Posted By: Amb47uk
Date Posted: 10 Jul 2019 at 10:13am
You are doing gods work with these ;-)


Posted By: big10p
Date Posted: 10 Jul 2019 at 11:16am
Great to see someone doing these, especially with the optional HV kit. C36 has caused me a few problems in the past!

-------------
WANTED: Sega Cash Cube CP end plate. http://www.ukvac.com/forum/cash-cube-cp-end-plate_topic368139.html" rel="nofollow - Click me for details!


Posted By: Liam
Date Posted: 10 Jul 2019 at 11:47am
How much for the film capacitors alone?



Posted By: Tommybiscuit
Date Posted: 10 Jul 2019 at 12:46pm
I would take two deluxe kits for the MTC 9000? 

-------------
None


Posted By: BarrySlisk
Date Posted: 10 Jul 2019 at 2:20pm
I will take a couple of Deluxe's when you have a new supply. Just PM me when ready.....


Posted By: Ace`
Date Posted: 10 Jul 2019 at 3:12pm
Originally posted by Liam Liam wrote:

How much for the film capacitors alone?



Once I've done all the deluxe orders I'll see what I've got left / how much.

Tommy, Barry and everyone else that pm'd I'll get in contact as soon as I have the kits made up and they're ready to go.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: Ace`
Date Posted: 11 Jul 2019 at 1:47pm
I've made a small reivison to the deluxe kits, they now include an extra film cap bringing the total up to 35 caps. This is to add more compatibility across revisions, the price is the same and those that have already bought kits will get the extra cap too, those kits will be posted out tomorrow.

I've done a massive parts order so will be able to take more kit orders around the middle of next week and then also start working on kits for others monitors.

Thanks for all the support guys. Smile


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: bonehead
Date Posted: 11 Jul 2019 at 2:42pm
Good work.
What sort of price will G07 kits be if you make them up?
Cheers


-------------
Always looking for a bargain.
Wanted., bezerk, mad planets.


Posted By: Tommybiscuit
Date Posted: 11 Jul 2019 at 3:32pm
Awesome - thanks

-------------
None


Posted By: Bods
Date Posted: 11 Jul 2019 at 3:59pm
Very nicely Presented kit that Ace Thumbs Up
 
Are there lists of caps for most of the common monitors even
 
I've got all the ones wrote down for this Toei monitor recently capped, need to type it all out
 
Those Kortek Monitors are a Joy, just been working on one, everytime I plug one in it smokes or goes bangLOL and guess what this did
 
 


-------------
WANTED! Buggy Boy Junior Rear Seat. Continental Circus Cockpit Lower Rear Light Plexi and more space


Posted By: vids
Date Posted: 11 Jul 2019 at 4:16pm
I am interested in some kits


Posted By: onepunchrob
Date Posted: 11 Jul 2019 at 5:13pm
I'd be interested in an MTC900e kit if you're doing one :)


Posted By: Ace`
Date Posted: 11 Jul 2019 at 8:52pm
Originally posted by bonehead bonehead wrote:

Good work.
What sort of price will G07 kits be if you make them up?
Cheers


Sorry Steve didn't see your first message, it's been a while since I capped a G07 but I don't remember there being a huge amount of caps, I do remember something about a sync mod though. Most of the expense is in the filter cap, pure guess but I think around £12. That is one I'll do for sure.


Originally posted by Bods Bods wrote:

Are there lists of caps for most of the common monitors even


There are, I've collected quite a few over the years along with a load of pdf monitor manuals.


Originally posted by funhouse funhouse wrote:

My MTC9000 is powered by a currently flaky US250 PSU which I'd definitely be interested in a cap kit for.


Honestly you're best replacing that thing with a switcher and iso. But if there's depand for kits I'll make them. Smile


It looks like in no particular order the next kits will be G07, Polo (15k 19/25 models first), K7000, MTC900e. Although no one has mentioned K7000 yet so maybe that one can wait.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: Retroman839
Date Posted: 11 Jul 2019 at 9:33pm
can I get a kit for mtc9000  as well


Posted By: virtvic
Date Posted: 11 Jul 2019 at 11:01pm
Is that a degauss positor on the deluxe kit too?



-------------
THE PENCE IS MIGHTIER THAN THE SWORD!

Check out the podcast

http://tenpencearcade.co.uk

Got cabarets? > CALL ME!


Posted By: Ace`
Date Posted: 12 Jul 2019 at 9:28am
No, I don't think that's something I could get in large numbers for a good price since they haven't made them for 20 odd years.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: tin
Date Posted: 12 Jul 2019 at 10:06am
I will definite have a couple of 9000 dlx kits, and adding my vote for K7000 and 900E (although, I'm gonna take a look at all my various 900s and see what they are exactly). I'll PM.

With presumably a sizeable stash of capacitors on hand, would you do custom orders if the buyer did the donkey work in getting the cap list?



-------------
This is your crew chief // Yeah, the course is really tough // But it's a beautiful day // So good luck!


Posted By: Ace`
Date Posted: 14 Jul 2019 at 2:34pm
Originally posted by tin tin wrote:

With presumably a sizeable stash of capacitors on hand, would you do custom orders if the buyer did the donkey work in getting the cap list?

Maybe, but I've noticed no matter how many you have there's still going to be gaps. For example I've made a start on Polo kits listing what I need etc and there's very little overlap. I think there were only two caps the same value and voltage that are also used on the mtc9000.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: Ace`
Date Posted: 15 Jul 2019 at 6:00pm
My order came quicker than expected so I've made another 10 deluxe kits. I have messaged everyone that said they wanted one or more, please pm me if I've some how missed you.

I've started work on Polo and G07, I'll try and have some kits ready in a week or so.




-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: tin
Date Posted: 15 Jul 2019 at 6:42pm
Am I wrong about being excited at the prospect of soldering a load of caps?


-------------
This is your crew chief // Yeah, the course is really tough // But it's a beautiful day // So good luck!


Posted By: Ace`
Date Posted: 15 Jul 2019 at 7:23pm
Yes. LOL


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: TWB
Date Posted: 15 Jul 2019 at 7:39pm
Mine arrived today the soldering will have to wait I’m enjoying sunny weather while it lasts.

Nice one Paul it’s good to see someone over here doing cap kits

-------------
WANTED
Cabs:
Leisure 2000
PCBs: Iron Horse
Parts:


Posted By: urbanledge
Date Posted: 16 Jul 2019 at 12:00am
I'll be in for at least one mtc9000 and at least one polo.
Gotta check what monitors I have!!!


Posted By: kidchameleon
Date Posted: 16 Jul 2019 at 6:28am
Hi,

Would this cap kit suit a Hantarex MTC9110?

Thanks!


Posted By: Ace`
Date Posted: 16 Jul 2019 at 9:12am
Originally posted by kidchameleon kidchameleon wrote:

Hi,

Would this cap kit suit a Hantarex MTC9110?

Thanks!


Yes, it's just missing the three caps for the east/west card but I'll add them if you let me know it's for a 9010 when ordering.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: Ace`
Date Posted: 16 Jul 2019 at 5:14pm
Three deluxe kits still available from this batch.


-------------
http://www.ukvac.com/forum/topic353880_post968941.html" rel="nofollow - Wanted PCBs and Parts

http://notinmame.blogspot.com/" rel="nofollow - Not In Mame


Posted By: Retroman839
Date Posted: 17 Jul 2019 at 7:46am
Please can I have a kit



Print Page | Close Window