Problem Kortek KT - 2914F Flyback/LOPT + Cap Kit

CoS72

Newbie
vacBacker
Feedback
3 (100%)
Credits
190CR
Hi All,
I am new to the scene and trying to learn fast .... Can anyone help me with a link or source for a new FB/LOPT for a Kortek KT-2914F chassis - from a fast and furious .. The manual lists the PN as 130001901 FQM19A002 ... I need a cap kit too and have found a few American suppliers for monitor rebuilds who can do this ... just wondered if there's a UK source for this kind of thing ? Looked on the usual Internet sites/searches but not found anything ... i can break the cap kit down on mouser etc but would be so much easier if one of you had something in the UK to help ?
 

gunblade

Active member
vacBacker
Feedback
22 (100%)
Credits
8,844CR
there seems to be some confusion about what flyback is in there, like any chassis repair you go with whats on the chassis (if it has previously worked correctly) rather than whats in a schem or manual
FFA76418U is listed as flyback for these but you should look on yours to find the code
Also do you have a dual or single focus tube?
I don't use cap kits, if the supplier makes a mistake then you are likely in big trouble. Again i go by whats on the chassis, also i replace caps one by one as screen printing of the polarity can be wrong on the chassis itself
Not wanting to scare you but the yokes on these tubes have a habit of overheating and falling apart
 
Top