MAME cab help needed ( READ DISCLAIMER ! )

[Bazfish]

[ukvac] MAME cab help needed ( READ DISCLAIMER ! )
Hi All

Disclaimer: I am writing this mail knowing full well the controversy it
will cause. If you have problems, gripes, winges etc. with what I am doing
DO NOT READ ! It is as simple as that. I am only interested in the opinions
of those who want to help... NOT THE OTHER 99% OF UKVAC as it appears at the
moment.

To business:

I have built my MAME cab and all is well, the only problem I am having is
getting it to run on a standard Hantrex monitor. I am using Arcadeos through
true DOS... DOS is fine but as soon as Arcadeos kicks in I loose frequency.
What I need is the settings within Arcadeos or another piece of software
that will allow me to run the whole shooting match through the cab.

Once again for those who did not reed the above I am NOT interested in
starting a flame war.... or in the opinions of the minority. I just want to
get my project finished.

Cheers All !

Bazfish

------------------------------------------------------------------------
Best friends, most artistic, class clown Find 'em here:
http://click.egroups.com/1/5533/14/_/5935/_/963058164/
------------------------------------------------------------------------

 

[the-hat]

RE: [ukvac] MAME cab help needed ( READ DISCLAIMER ! )
set the "INCABINET=1" currently set to zero.

This will then adjust the frequency for Arcadeos as well as mame.

Kev.