jerryspaghetti
Active member
I’m getting an error 34 on Net dimm that was working as it should a couple of weeks back.
Jumpers are in the right place for netbooting.
Voltages are good and set just a tad over 5v and 3.3v.
Mobo ram tests 100% good
Network settings all checked and testing good
Net dimm board test 100% good
When first booting it will say ‘checking network’ but won’t boot from pi as usual. When I enter test menu and come out again I get error 34.
Anyone know if the ram can fail but still show up as good?
Anyone updated the firmware from the pi force tools? It’s currently 4.02
Baffled!
Jumpers are in the right place for netbooting.
Voltages are good and set just a tad over 5v and 3.3v.
Mobo ram tests 100% good
Network settings all checked and testing good
Net dimm board test 100% good
When first booting it will say ‘checking network’ but won’t boot from pi as usual. When I enter test menu and come out again I get error 34.
Anyone know if the ram can fail but still show up as good?
Anyone updated the firmware from the pi force tools? It’s currently 4.02
Baffled!