OT: supergun

[andy_geezer_1976]

[ukvac] OT: supergun
James,

How did you hook up the Scart Connector to the TV? I know you can't just
plug the RGB, Sync into a normal TV, so what componets(resistors) do you
need on the RGB and Sync levels? I can take it you can just use the +5V from
the PSU to Pin16 (Input Video Blanking).

Thanks

Andy

 

[MrMish]

Re: [ukvac] OT: supergun
> How did you hook up the Scart Connector to the TV? I know you can't just
> plug the RGB, Sync into a normal TV,
Course ye can Just down the brightness down a bit if need be.

> I can take it you can just use the +5V from
> the PSU to Pin16 (Input Video Blanking).
Yes. If you want to be really cheap you can also drag the sync line
here and it will work with 99% of TV's.

Bryan

 

[MarbleMad]

Re: [ukvac] OT: supergun
In article <3A6D5053.9A25B1AD@mame.net>, Bryan McPhail <mish@mame.net>
writes
>> How did you hook up the Scart Connector to the TV? I know you can't just
>> plug the RGB, Sync into a normal TV,
>Course ye can Just down the brightness down a bit if need be.
>
>> I can take it you can just use the +5V from
>> the PSU to Pin16 (Input Video Blanking).
>Yes. If you want to be really cheap you can also drag the sync line
>here and it will work with 99% of TV's.
>
few resistors to take the edge of the RGB and also connect pin 16
*through a 100ohm resistor* to +5V.
---
James G Watt

PLEASE NOTE the new email address:

kinetic-arts@ntlworld.com
http://www.kinetic-arts.co.uk
Part of the Video Arcade Game Collectors WebRing.

You are in a maze of twisty little passages, all alike.