Kung Fu Idiot

[AndrewM45]

Hi
Got Kung Fu Master bootleg pcb
Irem converter to Jamma
Gonbes Cga to Vga thingy.
Want to plug into jamma can w lcd monitor (currently running a pandoras box)
Monitor connects atm via a vga cable directly into pandoras box
From researching the gonobas widget should be then connected - can see monitor plugs on there - but how do I plug it into the KFM-Irem board ?

 

[Lurch666]

If your cha to vga thingy doesn't have RGB input you won't be able to do it.
It would require the addition of R,G,B and sync wires to connect from the jamma side to the converter.

 

[AndrewM45]

If your cha to vga thingy doesn't have RGB input you won't be able to do it.
It would require the addition of R,G,B and sync wires to connect from the jamma side to the converter.

Its got rgb input. Enclosed photo. Just dunno how it connects to the board/Item jamma converter.

 

[AndrewM45]

Its got rgb input. Enclosed photo. Just dunno how it connects to the board/Item jamma converter.

Are sync wires the key?

 

[Lurch666]

Look up jamma connection. That will tell you which pins on the jamma connection are R,G,B and sync. Connect those to the correct input on your adapter.

 

[grobda]

you need to connect power and video to the connectors indicated.