Mechanized Attack gun sensor

[Levington]

Hopefully this is the right section for this post its the first one I am starting.

I've just bought a mechanized attack gun cheap and its missing its sensor board. All the wiring and the trigger and solonoid are there and test fine but theres no sensor board at all. Now I can't see a schematic anywhere online for it in fact only a couple of pictures for it even. Theres the pinout information on the service manual so I know what the connector does. Does anyone have either a schematic or high quality pictures of a board (assuming the board itself is beyond rare).
The other question I have is does anyone know if a board from say operation wolf would work in the gun and with the game itself? The boards look similar and I can see a schematic for them. I work repairing music equipment for a living so its no problem to knock up a basic circuit like that.

To clarify I have the original mech attack board and the PSU that powers the gun etc basically I have everything needed other than the sensor board itself.

Thanks for any help.

 

[Bods]

I was tempted with that lot, quite a good deal really, bummer the sensor board missing, i'm not familiar with SNK Guns

 

[Jacmar]

Schematics ....

https://www.ukvac.com/forum/threads/new-schematics.86332/

 

[griffo83x]

Great game i remember pumping loads of 10p into this in Blackpool late 80s

 

[69er]

You could try Andrew Smith at professional leisure services at Ilkeston Derbyshire … he specialises in gun sensors and cables etc among other general machine parts.

I got a rare maze of kings gun case off him ages ago and a few other bits like Namco lenses and triggers over the years. He lists some sensors for other makes but may have odd others in his workshop? Phone number is on google, he does various other repairs too, if he is still running the business? He is very good with opto guns. He could advise if other sensors fit SNK

I had a couple of mechanised attacks back in the 90s but don’t think I still have guns just a couple of marquees (different widths)

 

[Levington]

I was tempted with that lot, quite a good deal really, bummer the sensor board missing, i'm not familiar with SNK Guns

I took a chance and for the most part its ok but of course this is the important bit

 

[Levington]

Schematics ....

https://www.ukvac.com/forum/threads/new-schematics.86332/

Omg there is it. Thank you so much for linking these. Its not the best scan in the world but its enough to see how it works. It is actually very very similar to the operation wolf board just a bit more basic and less smoothing on the power so I recon it would work. But either way this should be enough to make a new board.

 

[Bods]

SNK one apparently



Op Wolf Sensor

 

[Levington]

You could try Andrew Smith at professional leisure services at Ilkeston Derbyshire … he specialises in gun sensors and cables etc among other general machine parts.

I got a rare maze of kings gun case off him ages ago and a few other bits like Namco lenses and triggers over the years. He lists some sensors for other makes but may have odd others in his workshop? Phone number is on google, he does various other repairs too, if he is still running the business? He is very good with opto guns. He could advise if other sensors fit SNK

I had a couple of mechanised attacks back in the 90s but don’t think I still have guns just a couple of marquees (different widths)

Thanks for that someone else managed to link me the schematic so it will be easy enough to knock up a new board anyway its much simplier than the operation wolf board anyway. But always good to know connections and have a friend very close to Illkeston anyway. Thanks

 

[Levington]

SNK one apparently

View attachment 49838

Op Wolf Sensor

View attachment 49839

Brilliant thanks. Its actually like a very basic version of the operation wolf one but should be easy to knock one up now.

 

[Trol]

For what its worth.. I play my Mechanised Attack pcb with standard Happ 45's, so you can problaby hack in a happ board too.

 

[Levington]

For what its worth.. I play my Mechanised Attack pcb with standard Happ 45's, so you can problaby hack in a happ board too.

Good to know thanks, looking at the layout of the original board it does look like it would work