Newb question

[AndrewM45]

So I’ve got jamma cab w lcd monitor.
Then a kung fu master pcb, and an adapter to make it jamma.
But where do i plug the telly in?

 

[Spanky]

There is no telly, that blue thing on the left connects to the adapter. Make sure you get it the correct way up.

 

[Georgian2]

Can you post an closer picture of that blue connector? If is jamma, the video pins are not connacted. (I could be wrong)

 

[TheDaddy]

You need to hack the Jamma and add one of these :-

Video Game Converter Board CGA/EGA/YUV/RGB to VGA Arcade Game Monitor to LCD CRT | eBay UK

It can convert CGA/EGA/VGA/YUV Component input Signal to HD Monitors (CRT Monitor LCD Monitor PDP Monitor) with VGA interface (VGA video signal), and automatically scan CGA / EGA / YUV signal, and VGA output signals.

www.ebay.co.uk

**** This is assuming your screen is a VGA one as I assume ? ****

This will allow you to operate an LCD in the cab , These can be a pain to set up sometimes !

Hope this helps,

Dave.

P.S Post a pick of the connectors on the screen so we can see what you have.