Rejuve CRT South East

[jerryspaghetti]

May have asked this before but anyone South able to do a Rejuve on a zenith (wells Gardner k7000 series tube) ?

 

[Retroman839]

Pic of kneck /crt socket pls
See if I have the socket

 

[jerryspaghetti]

Pic of kneck /crt socket pls
See if I have the socket

I’ll check mate thanks

 

[Retroman839]

I’ll check mate thanks

I will pop up a pic of my sockets

 

[Retroman839]

These 4 are all my sockets I got for the rejuvinator

 

[Stickman]

do you have the tube number, usually a sticker on it may be AX..... or something like that, as it is not just the sockets but also the setting needed like heater voltage G1 etc. Where South East are you.

 

[jerryspaghetti]

So it turns out that I may not need a Rejuve but handy to know you have the gear @Retroman839

Chassis could do with a service and a little convergence adjustment

 

[CMYKhazi-Dan]

Kitana > Mileena 😍

 

[Retroman839]

👍 looks good .

Yeh i got a muter rejuvinator
2nd one I have had .

1 st was on loan from wells Gardner . and was the best muter you could get .

So I got one as soon as I could .

I used the rejuvinator on a ms8 25 hitatchi tube ..

I need to pull it out and take a look at again as it’s just stored but i recall after service it was all good, And the rejuvinator also did improve the picture.

 

[jerryspaghetti]

Kitana > Mileena 😍

Perv