The Electrocoin owners thread
- Thread starter _Matt_
- Start date
Flyback2021
Active member
Will get all the cabinets together next year and makes some
Proper documentation - too much stuff being finished currently.
Hoping for that feeling of some sort of EC completion when they all side by side .
Proper documentation - too much stuff being finished currently.
Hoping for that feeling of some sort of EC completion when they all side by side .
Last edited:
Assume this cab is Electrocoin built, I believe its the smaller version cab of Lethal Enforcers but no info on them, was offered free here or J+ years back as shell with just wiring loom, I would have sooner just bought a cab complete non working but it was because of the size I really wanted this type as its small and mirrored in which i like for shooting games
68" high, 26" wide and only 29.5" deep
Plain old cab but ideal for multi gun games, bought the guns and a pcb, I had a spare 25" Polo monitor which was good as I didn't need a 110v transformer, made a plate to slot in back and knocked up power supply unit so the kettle socket aligned with the hole
would have cost more than buying a complete non working cab if you had to buy all the parts, not even any monitor brackets so I had to make something
That was temporary marquee to save being blinded by the light lol and BANG working multi gun cab
68" high, 26" wide and only 29.5" deep
Plain old cab but ideal for multi gun games, bought the guns and a pcb, I had a spare 25" Polo monitor which was good as I didn't need a 110v transformer, made a plate to slot in back and knocked up power supply unit so the kettle socket aligned with the hole
would have cost more than buying a complete non working cab if you had to buy all the parts, not even any monitor brackets so I had to make something
That was temporary marquee to save being blinded by the light lol and BANG working multi gun cab
Flyback2021
Active member
Yes has the production stickers on the reverse so could have been built under license or as a general / shooter cabinet . I have a super monoco GP which has some of the Electrocoin labeling on reverse and a EC sticker on the glass but is the widely seen designated cabinet.
I love the Levy stickers found on many of their cabinet’s particularly Goliath and Xenon it seems. The paper inspection stickers seems to not have survived quite so often.
There's actually 2 answers to that question.
If you mean the cab in the line with the green arrow above it then that's just the reflection of the Mercs in the mirror. The other one of those control panels with the yellow arrow pointing to it above the Donkey Kong cocktail is a Street Fighter the same as yours. There's only actually 6 cabs in that line I think although I've got 8 on that side now.
Flyback2021
Active member
Love the Mercs Cabinet !
Fooled by the Mirror lol, I put mirrors on 2 sides of my building so it looks bigger. if you look at the photo properly the coin doors on the cabs are the wrong way around. cool Street Fighter and Mercs, makes you wonder how many others had those CP's
When I've cleared more junk I'll be able to pull it out, base looks same electrocoin build with brackets attaching base to sides
Needs moving to another location when I have one and the Trolls Mechanical steer a ball type cab going where this is currectly in the penny arcade section
Yay I found em
That's really nice that, glad you found the pics. Shame you let it go but then you've got loads of amazing cabs.
Looking at your ex Lethal Enforcers cab I wonder if that's the same one that I nearly bought that had Point Blank in? It was on Jamma+ around 12 years ago and the seller agreed to sell it to me but another member swooped in and talked him into selling it to him instead. A couple of weeks later the monitor was taken out along with the Point Blank guns and board with the shell then sold or given away. While I was annoyed at first it worked out of as I bought a couple of different cabs off him instead. If it's the same cab then I'm glad it got put to good use!
Ah yeah, the mirror fools me every time I'm in there. The full wall is a mirror and the joins are behind the cabs on either side so it's very hard to tell even when you know it's there.
I noticed in an old post of yours that you had mirrors too. I couldn't recommend them more highly, the difference it makes to a small space is incredible, it just feels like your room is twice the size!
Looking at your ex Lethal Enforcers cab I wonder if that's the same one that I nearly bought that had Point Blank in? It was on Jamma+ around 12 years ago and the seller agreed to sell it to me but another member swooped in and talked him into selling it to him instead. A couple of weeks later the monitor was taken out along with the Point Blank guns and board with the shell then sold or given away. While I was annoyed at first it worked out of as I bought a couple of different cabs off him instead. If it's the same cab then I'm glad it got put to good use!
Ah yeah, the mirror fools me every time I'm in there. The full wall is a mirror and the joins are behind the cabs on either side so it's very hard to tell even when you know it's there.
I noticed in an old post of yours that you had mirrors too. I couldn't recommend them more highly, the difference it makes to a small space is incredible, it just feels like your room is twice the size!
That’s just brilliant .i need to stop looking at it
Such a brilliant collection! Is there anything facing them .not that you need it
Thanks, nothing compared to the cabs you've had and have though.
Yes there is a few on the other side too. I'm still looking for decent pics of those though as there's no space to take a pic at the moment. Think I may have them on an old phone.
After talking about Final Blow yesterday I dug out these pics as I thought I may as well put them up in this thread. It's a NOS Final Blow pcb in its Taito box. I took these pics a few years ago and it's well stored away now so I can't easily take a pic of this but wrote on one of the sides of the box is "John Stergides do not sell" or something along those lines. I wonder why, prototype maybe? Or had Electrocoin made minor changes with their development kit? Who knows..
Flyback2021
Active member
There is a couple of Electrocoin midi driving cabinets on eBay currently.
Electrocoin driver ebay
Not sure exactly what they would have been originally ? Perhaps just a generic multi use driver cab?
Electrocoin driver ebay
Not sure exactly what they would have been originally ? Perhaps just a generic multi use driver cab?
Flyback2021
Active member
There is 2 listed by same seller. Both look like a fair amount of work.
Yeah that's different to my PCB's, one has colour issues due to the I forget what it's called black hybrid thing that commonly get broke off, it's all in one pcb
but seems which I didn't know they did it on F2 Cartridge Based system also
Cart for sale
https://www.ebay.co.uk/itm/155058763947