Any interest in a Group buy in wigan 3x noir?

Retroman839

Senior Member
vacBacker
Feedback
13 (100%)
Credits
8,230CR
image.jpgimage.jpg
£136534 ?image.jpg
I guess what I’m looking at here are the mapple connecters / basically usb for vmu / dc pad / keyboards
Of the face of the Naomi filter
 
Last edited:

Retroman839

Senior Member
vacBacker
Feedback
13 (100%)
Credits
8,230CR
Ok ..
My Namco noir has ..
No left channel on the amp .
So I have made some quick disconnect connectors to mate into the original connecters so as not to hurt any of the original leads .image.jpg
Amp on left is noir amp
Amp on right is namco animal kieser amp .

Diffrent but I’m going to give it ago ..

I can now utilize the 12v
And connect up to speakers in the cab without cutting any original cables .

Also one of my original speakers has the rubber perished ..
I used to refurb B&o replace rubbers
So will replace the rubbers on both speaker.

As for the noir amp with 1 channel I will investigate that ..
Connect it up on the bench
See how it performs away from the cabinet wiring .

If it’s still bad
See if I can repair it ..
Maybe try a new ic / filter cap
 
Last edited:

Retroman839

Senior Member
vacBacker
Feedback
13 (100%)
Credits
8,230CR
IMG_1108.jpeg

New namco amp in noir cosmic smash sounds nice ;)


image.jpg
Namco animal kieser amp works lovely..
Even with the rubber tawn on one side
Can’t hear any difference from it ..
They sound good and nice bass .
 

Chihiro

I do this shit for a living yo!
vacBacker
Feedback
6 (100%)
Credits
1,004CR
I had my oem 12v psu, sound amp re-capped & replaced the STD connect pcb to resolve sound issues prior I used to get grounding hiss.

Cleaned the volume pot with IPA & a air blower

I also replaced the main speakers.
 

Attachments

  • 20260324_200358926.JPG
    20260324_200358926.JPG
    128.2 KB · Views: 13
Top